Heat Tritment Furnace

Type

Benchtop

Continue Operating Temp.

1150℃

Heating Element

Silicon Carabid

Insulation

Ø First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket.

Ø Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.

Ø High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity

Temperature Accuracy

±1℃

Thermocouple

K type (Pt-Rh) with 99.7% purity Alumina tube

Temperature Controller

Ø PID automatic control via SSR power control with phase angle fired, current limiting resistor.

Ø 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.

Ø Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.

Ø Over temperature protection and alarm allows for operation without attendant

Electronic Component

Autonics / Schneider / L&T Electronics Brands

Heating Rate

≤ 5℃/Min (Suggest 0℃ TO 3℃/Min for Longer Life Using of Furnace)

Safety Protection

Overheat And Thermocouple-Break Alarm

Certification

NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED

Furnace Shell

High Quality GI Sheet With PP Powder Coated

Using Attentions

Ø The cooling rate for this Muffle Furnace 1000 type shall also not exceed 3℃ /min.

Ø Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.

Ø Small cracks may appear on the surface of the refractory ceramics over extended use.

Ø This is a normal occurrence and the cracks may be repaired with alumina coating.

Ø Refractory door block must be inserted before closing door.